Hopper Chamber
2-Chamber(1/2 1/2)
Divide the hopper into two equal feed-storage chambers for separate feed allocations.
AeroSpreader S1000
AeroSpreader S1000 is a configurable pneumatic aquaculture feed broadcaster with a nominal 1,000 kg marine-aluminum hopper and Slide & Stow lid. Select the available metering, blower, broadcast equipment, controls and mounting arrangement for the feeding operation. Manual metering, volumetric metering and load-cell weighing are distinct arrangements; weighing and automation are included only when explicitly specified. Feed rate and coverage depend on the selected equipment and pellet properties.
Explore the machine
Images show representative equipment. Your selected options define the offering.
Your machine, your setup
Configure your machine
Choose your setup. Only compatible options are shown.
Configuration selected
Your configuration 19
- Hopper Capacity
- 1000 kg
Choose the 1000 kg hopper configuration to match the feed capacity and installation layout required for your operation.
- Hopper Chamber
- 1-Chamber
Use a single feed chamber for one common hopper storage area.
- Fuel
- Gas
- Engine
- AB135 TEFC-Electric w/7.5hp Frequency Drive
AB135 TEFC-Electric with 7.5hp Frequency Drive provides an electric blower-drive option with a frequency drive for motor-speed adjustment.
- Metering
- Manual
- Broadcast
- 4" Manual Periscope Feed Head
Choose a 4-inch manual periscope feed head for direct operator control of discharge direction.
- Outlet Size
- 3"
- Extension Tube
- No Extension Tube
Keep the selected broadcast arrangement without an additional extension tube.
- Gull Wing
- No Gull Wing
Configure the broadcast arrangement without the optional Gull Wing accessory.
- Periscope
- None
- Control Type
- Cable Controls 1000&above
Use cable-operated feeding controls to position the controls at a practical operator viewing location.
- Enclosure Panels
- No Enclosure Panels
Keep the configuration without optional enclosure panels.
- Rotate Motor
- No Rotate Motor
Configure the offering without the optional hopper-outlet agitator.
- Mobility
- Stationary
Choose the stationary mounting configuration for a fixed installation on the intended platform, vessel or site.
- Bulk Bag Safety Ring
- No Bulk Bag Safety Ring
Configure the hopper without the optional bulk-bag safety ring.
- Bulk Bag Cutter with Guide Frame
- No Bulk Bag Cutter
Configure the hopper without the optional bulk-bag cutter and guide-frame arrangement.
- Eductor
- 4inch eductor
Use the 4-inch eductor to match the selected air and feed path.
- Rate Control
- M100
Add the M100 rate-control option to the feeding system.
- Inlet Silencer
- AB135 Inlet Silencer (6.5 hp)
Add the AB135 Inlet Silencer (6.5 hp) option to the matching blower inlet when inlet noise reduction is desired.
Make it work for you
Other available options
Compare compatible alternatives. Choose an option to update your configuration.
Fuel
Diesel
Fuel
Electric
Engine
AB135 Pull Start 6.5HP
Pair the AB135 blower with a 6.5 hp engine and manual pull starting for a straightforward engine-driven feeding setup.
Engine
AB135 Electric Start 6.5HP
Pair the AB135 blower with a 6.5 hp engine and electric starting for convenient start-up at the machine.
Broadcast
4" Oscillating Periscope Feed Head
Choose a 4-inch oscillating periscope feed head for an automatic sweep of the discharge direction, reducing continuous manual aiming.
Broadcast
4" Powered Periscope Feed Head
Choose a 4-inch powered periscope feed head when powered directional control is required for the broadcast arrangement.
Broadcast
4" 3m Boom with 3m Broadcast Tube
Add the 4-inch 3m Boom with 3m Broadcast Tube arrangement to position the broadcast tube beyond the mounting platform. Tube length describes the equipment, not a guaranteed feed-throw distance.
Broadcast
4" 3m Boom with 6m Broadcast Tube
Add the 4-inch 3m Boom with 6m Broadcast Tube arrangement to position the broadcast tube beyond the mounting platform. Tube length describes the equipment, not a guaranteed feed-throw distance.
Outlet Size
4"
Outlet Size
5"
Extension Tube
4" Extension Tube
Add the 4-inch extension tube to extend the selected feed-delivery arrangement beyond its standard outlet.
Gull Wing
Gull Wing 4"
Add the Gull Wing 4" accessory to the matching broadcast arrangement.
Periscope
Manual
Periscope
Automatic
Control Type
Extended Cable Controls 1000&above 16ft/4.9m
Use extended cable controls 1000&above 16ft/4.9m to position feeding controls farther from the machine, where the operator can observe the feeding area.
Enclosure Panels
Enclosure Panels 1000
Add enclosure panels to the AeroSpreader S1000 configuration.
Rotate Motor
Rotate Motor 1000&above 1C
Hopper-outlet agitator to help limit feed bridging. This is separate from periscope rotation; supply voltage and control arrangement follow the configured equipment.
Mobility
Mobile Trailer
Choose the trailer configuration for moving the machine between feeding locations with suitable towing equipment.
Bulk Bag Safety Ring
Bulk Bag Safety Ring 1000
Add the Bulk Bag Safety Ring 1000 accessory to the selected bulk-bag loading arrangement.
Bulk Bag Cutter with Guide Frame
Bulk Bag Cutter 1000
Add the Bulk Bag Cutter 1000 option with guide frame for the selected hopper bulk-bag loading arrangement.
Eductor
No Eductor
Configure the offering without an eductor. The final feed-path arrangement must match the selected system.
Rate Control
No M100
Configure the system without the optional M100 rate-control unit.
Know the details
Specifications & capabilities
Explore the product information available for your selected setup.
Engineered details
Features
AeroSpreader S1000 is a configurable pneumatic aquaculture feed broadcaster with a nominal 1,000 kg marine-aluminum hopper and Slide & Stow lid. Select the available metering, blower, broadcast equipment, controls and mounting arrangement for the feeding operation. Manual metering, volumetric metering and load-cell weighing are distinct arrangements; weighing and automation are included only when explicitly specified. Feed rate and coverage depend on the selected equipment and pellet properties.
AeroFLOW gentle feed transport
AeroFLOW optimizes gentle, air-driven feed transport for reliable, consistent delivery while protecting pellets from damage. Airflow is matched to the feed, route and equipment configuration.
Hopper and construction
Nominal 1,000 kg capacity; marine-aluminum hopper with Slide & Stow lid.
Pneumatic feed distribution
The blower supplies airflow to convey dry aquaculture feed pellets to the configured broadcast outlet.
Technical overview
Specifications
AeroSpreader S1000 is a configurable pneumatic aquaculture feed broadcaster with a nominal 1,000 kg marine-aluminum hopper and Slide & Stow lid. Select the available metering, blower, broadcast equipment, controls and mounting arrangement for the feeding operation. Manual metering, volumetric metering and load-cell weighing are distinct arrangements; weighing and automation are included only when explicitly specified. Feed rate and coverage depend on the selected equipment and pellet properties.
Nominal hopper capacity
1,000 kg. Usable feed mass depends on pellet bulk density and the loading arrangement.
Configuration and performance
Blower, metering, outlet and controls follow the selected equipment. Feed rate and coverage depend on pellet properties and operating conditions.
Why it matters
Benefits
AeroSpreader S1000 is a configurable pneumatic aquaculture feed broadcaster with a nominal 1,000 kg marine-aluminum hopper and Slide & Stow lid. Select the available metering, blower, broadcast equipment, controls and mounting arrangement for the feeding operation. Manual metering, volumetric metering and load-cell weighing are distinct arrangements; weighing and automation are included only when explicitly specified. Feed rate and coverage depend on the selected equipment and pellet properties.
Operator-directed feeding
Match feed placement and delivery to the feeding area and observed feeding activity.
Application-matched installation
Plan the mounting arrangement, loading access and operator position around the configured machine and intended site.
See it in action
A closer look.
Watch AeroSpreader S1000 at work.
Play video
AeroSpreader S1000 - Demonstration 1
Play video
AeroSpreader S1000 - Demonstration 2
Take the details with you
Your download centre.
Keep a complete offering or just the information your team needs.